Ref: CLOCKEY-B
Quantity:
This is the most common type of key, if in doubt choose this style. Available in sizes 00 to 13. Not sure which size you need? Click here for a converstion chart from millimetres.If you order ten or more, you will be charged £1.50 each instead of £2.00 each.People who bought this item also bought:
Ref: CLOCKEY-SET
SAME AS PICTURED ABOVE BUT CHROME NOT BRASSWe bought a 'job lot' of thousands of keys, same design as the brass keys above but these are chrome-finish instead of brass. After a lot of work we've managed to put together sets of eight (sizes 1, 3, 4, 6, 7, 8, 9, and 10). Therefore £8.00 (including VAT) buys you all eight.
Ref: PWKEYSET
These will wind an antique pocket watches, ANY antique pocket watch, because this is a set of all the sizes from 00 to 12.Picture to right shows the English version, other options available (see below). Photograph of all three optionsPeople who bought this item also bought:
Ref: WATCHSPI
Five keys on a disc for winding watches, two models, even numbers and odd numbers.
Ref: PWKEY
Key for winding pocket watch, please state which size you require, there are 14 sizes from 00 to 12. (see also POCKET WATCH KEY SET, a set of all 14 on a keyring for £12.50)People who bought this item also bought:
Ref: Clockey-long
Some (typically French) carriage clocks have small holes and deep-set winding stems, these keys are thin and long. Available in sizes 1 to 5, Not sure which size you need? Click here for a converstion chart from millimetres.
Ref: CLOCKEY-GRAND
For longcase (Grandmother and Grandfather) clocks, to wind the weight up, which is why these come in larger sizes. Sizes 13 to 16 Not sure which size you need? Click here for a converstion chart from millimetres.Order ten or more and you will be charged (including VAT)just £3.00 each.People who bought this item also bought:
Ref: CLOCKEY-C
Suitable for very heavy clocks and clocks that are screwed to walls. Available in sizes 00 to 13. Not sure which size you need? Click here for a converstion chart from millimetres.
Ref: rad-key
A radiator key is a Size 10 clock key. The keys you usually get free with radiators are small aluminium size 10 clock keys. If you find you are struggling with the free key, consider the following options:- an actual size 10 clock key (see item above, select size 10)- this key, very small, good if the valve faces a wall and you don't have enough space
Ref: keyset
Contains:13 brass keys No.3-157 steel single keys No.2-88 steel double-ended keys (long thin stems) 5 brass double-ended keys (short stems) No.4-814 pocket watch keys No.00-12People who bought this item also bought:
Ref: CLOCKEY-D2
Double clock key for carriage clocks, one end is 1.95mm (the most common size to wind the hands), other end available in sizes 4. 5. 6. 7 and 8 (for winding the spring). Not sure which size you need? Click here for a converstion chart from millimetres.People who bought this item also bought:
Ref: CLOCKSPI
There are two sizes of the five-pronged 'spider':Odds: sizes 3, 5, 7, 9, 11andEvens: sizes 2, 4, 6, 8, 10.If you buy either one you have a good (80%?) chance that it will fit your clock; if you buy both you have a better (99% chance?) that they will fit. The IDEA is for traders to try the various sizes in clocks to which size single key to buy, but most traders use these as winders. Not for longcase (Grandmother, Grandfather) clocks - see next item.
Ref: CLOCKSTAR
Guaranteed to contain sizes that fit all large (e.g. longcase) clocks, sizes 12, 14, 16, 18People who bought this item also bought:
Ref: UT-KEY
Tiangular, square and round fittings fit gas and electrical meter cupboards, radiiator taps and stopcocks.