Store 
 
 
 

Navigation bar top
Home
Up
Catalog
Terms & Conds
Search
View Basket
Checkout
Contact Us
Navigation bar bottom
 

New Products

  1. Auracle AGT1 electronic gold tester + calibration sample (Ref: agt1)
  2. Multi (Diamond and Moissanite) Tester, MKII (Ref: multi-II)
  3. Chain nose pliers, very fine, 6 inches (Ref: chain-fine)
  4. Snub nose pliers. 6.5 inches (Ref: PLSNB-LGE)
  5. Chain-nose pliers. 6.5 inches (Ref: PLCH-LGE)
  6. End cutters, toughest, will cut thin steel (Ref: endcut-t2)
  7. 200g / 0.01g, model DD-200 (Ref: DD-200)
  8. 500g / 0.1g, model DD-500 (Ref: DD-500)

Jewellery / Component holder

Jewellery / Component holder

Ref: JLRY-HOLDER

In stock


Price:    £12.50 / $19.38
 £15.00 / $23.25 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


Fully-adjustable ball bearing so that you can work at any angle. Diameter 50mm.

People who bought this item also bought:
1. Block of Jewellers Rouge, 100g (Ref: ROUGE)
2. Polishing sticks (emery sticks, buff sticks) set of 8 (Ref: P-STICKS)
3. Professional polishes (4 grades) (Ref: Luxi)

Vice for holding a watch case holder (light duty)

Vice for holding a watch case holder (light duty)

Ref: VICE-W

In stock


Price:    £5.00 / $7.75
 £6.00 / $9.30 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


Watch vice approx. 4" X 4" X 2"Jaws are 1½" wide and open to 1½" Clamp (to clamp the vice to a table) opens to ¾"

Vice with table clamp (heavy duty) + mini-anvil

Vice with table clamp (heavy duty) + mini-anvil

Ref: VICE-2

In stock


Price:    £16.25 / $25.19
 £19.50 / $30.23 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


Jaws 45mm across, and open to 35mm.

The top (next to the jaws) is shaped as a flat (good for tapping) plus mini-anvil, see picture.

Vice with table clamp, revolving base (medium-duty)

Vice with table clamp, revolving base (medium-duty)

Ref: VICE/R

In stock


Price:    £12.50 / $19.38
 £15.00 / $23.25 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


6"X5"X5", jaws 2" wide and open to 1½".

Revolves 360° lockable. Very handy for small mechanical objects (e.g. movements) where you need to access the item from different angles without removing it from the vice.



People who bought this item also bought:
1. Polishing mops (Ref: mops)
2. Plastic Eyeglass, various sizes (Ref: EGS)
3. Battery Gauge (Ref: BATT-GAUGE)

Third Hand

Third Hand

Ref: 3RD-HAND

In stock


Price:    £6.38 / $9.89
 £7.66 / $11.87 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


I have tried 'third hands' with the two adjustable crocodile clips and, as far as I can see, they are so complicated they are impossible for a two-armed human to use. This one, however, is wonderful! An easily-adjustable self-locking tweezer (included) holds the item whilst YOUR two hands do the work!

Handvice with Hollow Handle

Handvice with Hollow Handle

Ref: HANDVICE

In stock


Price:    £2.98 / $4.62
 £3.58 / $5.55 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


Hand vice for holding anything small and flat, e.g. when filing a small metal plate. 5" long X½" wide, jaw opens to 2mm.

Pin Vice

Pin Vice

Ref: PINVC

In stock


Price:    £1.70 / $2.64
 £2.04 / $3.16 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


3.5" long, opens to 2mm, closes to zero, for holding wire, e.g. whilst making / sharpening the pins on brooches.

Wooden Ring Clamp

Wooden Ring Clamp

Ref: RGCLAMP

In stock


Price:    £2.55 / $3.95
 £3.06 / $4.74 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


Wooden ring clamp with wing nut. Felt-lined grips open to 8mm, nice chunky shape to hold in the hand, e.g. for holding a ring while you are engraving it or setting stones.

Set of 4 Pin Vices in a Pouch

Set of 4 Pin Vices in a Pouch

Ref: PINVC-SET

In stock


Price:    £3.83 / $5.94
 £4.60 / $7.13 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


Pin vice set for holding brooch pins or fine wire. Sizes (closing / opening):
0-0.8mm, 0.8-1.3mm, 1.3-3.1mm, 3.1-4.8mm


Pin Vice, large

Pin Vice, large

Ref: PINVC-LGE

In stock


Price:    £2.55 / $3.95
 £3.06 / $4.74 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


A large pin vice with a nice chunky end, 2mm to 3mm.

(There is also a spare collet: zero to 0.5mm - of limited use).

Pin Vice, double

Pin Vice, double

Ref: PINVC-DBL

In stock


Price:    £2.55 / $3.95
 £3.06 / $4.74 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


A good quality pin vice, one side closes to zero and opens to 1mm, the other side, 0.5mm to 1.5mm.

Heavy Duty Handvice

Heavy Duty Handvice

Ref: handvice-lge

In stock


Price:    £6.38 / $9.89
 £7.66 / $11.87 Including  VAT at 20%

Quantity:  

You will not be charged VAT if the order is posted to an address outside the European Union

For next day delivery, select “Next Day Delivery” when you check out (U.K.)


Large hand vice, 7 inches long, 30mm wide jaw opens to 15mm, includes slots for holding thin long things (pins, rod).