Ref: 8X30-L
Quantity:
8X magnification, 30mm diameter lens. Rests on page.The three LED lights give an exceptionally bright and a very 'even' light. As a 'last resort' for the partially-sighted, this is certainly worth a try. As an engineers (or stamp / coin dealing) stand magnifier, it is the best. More...
Ref: stand-8X23
8X magnificationLens diameter 1 inch (23mm by my ruler)Stands 1.5 inches high, top rim turns to focus (slightly). Read all about magnification, size and working distance, click here See also: Eyeglasses
Ref: stand-10X30
10X magnificationLens diameter 30mm Stands 2 inches high Read all about magnification, size and working distance, click here See also: Eyeglasses
Ref: stand-7X50
7X magnificationLens diameter 50mm Stands 2.5 inches high Read all about magnification, size and working distance, click here See also: Eyeglasses
Ref: lin10-L
Plastic construction, exceedingly powerful LED light built in, as with all the linen provers it folds flat when not in use. The light really makes a difference, the effect is quite spectacular.10X magnification. Folded flat: 38X38X16mm (max. - including battery compartment)Open: 37mm tall, base 27X27mm, lens 12mmRead all about magnification, size and working distance, click here
Ref: LIN8
Metal construction with glass lens. The base has 'slots' to measure 1 inch, 1/2 inch and 1/4 inch. Supplied in a leather pouch. Optical quality quite acceptable.8X magnification. Folded flat: 45X25X13mmOpen: 40mm tall, base 45X25mm, lens 18mmRead all about magnification, size and working distance, Click here See also: Eyeglasses
Ref: LIN10
Metal construction with glass lens. The base contains a square with 1/2 inch sides. Supplied in a leather pouch. Optical quality quite good.8X magnification. Folded flat: 25X20X8mmOpen: 23mm tall, base 27X20mm, lens 16mmRead all about magnification, size and working distance, click here See also: Eyeglasses
Ref: 7521
75mm (3 inch) diameter lens, 2X magnificationwith an 'inset' 18mm diameter, 6X magnification.Can be used as traditional hand magnifier, or slotted into the stand (two positions, 6 inch or 7 inch working distance). Read all about magnification, size and working distance, click here See also: Eyeglasses
Ref: 10X20-STAND
One arm extends to 7 inches (single swivel-tilt mechanism), supplied in a heavy duty pouch, lens is 20mm diameter, 10X magnification. Quite adequate for quick inspection or emergency repairs but not (in my opinion) good enough for working under for prolonged periods (see other loupe on a stand, ref. 10X30-stand). Good value nevertheless. Read all about magnification, size and working distance, click here See also: Eyeglasses
Ref: 10X30-stand
Fully adjustable, two stems tilt / swivel / lock, use it up high (maximum 11 inches) for fixed objects such as vases or lower it for flat objects that can rest on the workbench. Lens is 30mm diameter, 10X magnification. The largest, strongest magnifier on a stand, high quality triplet lens, an alternative to a low-power microscope for working on miniatures, watches etc. Also good as an inspection magnifier for electronics, lower the magnifier close to the table, pass the items underneath with both hands.Read all about magnification, size and working distance, click here See also: Eyeglasses
Ref: stand+-5X30or7X20
Magnifier with ingenious mechanism, two ball bearings, easily adjustable to any angle, clips to a wooden stand.Two sizes, the 7X20 is really quite powerful for this type of magnifier, the 5X30 is good for working with watches.Find out about size, magnification and working distance click here