Ref: BATT-GAUGE
Quantity:
Very often you go to replace a watch battery and it doesn't have a number. How can you find one? How can you order one?Use this gauge - see which slot the battery fits, read off the number.Contains 45 slots with 60 battery numbers (they're divided into Light Duty Applications and Heavy Duty Applications).People who bought this item also bought:
Ref: BATT-CONT
You are changing the battery in a customer's watch, it's held in by a tiny battery contact - you unscrews the contact and it shoots into the air…and is gone forever. How embarrassing!Here is a pack of ten battery contacts (ten different shapes).People who bought this item also bought:
Ref: SDR9-B
Set of nine flat-head screwdrivers longest is 3.75", blade widths Sizes 0.6mm, 0.8mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2.0mm, 2.3mm.
Ref: OPEN-ROL-2
Bench tool for opening the backs of Rolex watches, can be screwed to a bench or fitted into a vice. Includes six dies for watch backs of sizes:28.3mm29.5mm26.5mm22.5mm20.2mm28.5mm
Ref: WBCP
Many a time customers complimented me on the range of tools for removing snap-back watch backs, but pointed out that they often had the embarrassment of being quite unable to get the watch back back on!This elaborate device has felt-lined discs and a sprung mechanism to gently 'squash' the back on without (hopefully!) crushing the entire watch.People who bought this item also bought:
Ref: OPEN3P
For removing the backs of watches that screw on (screw-back). Interchangeable 'keys' (four sets, four different shapes) slot into the tool, will open any watch back that has 'notches' around the edge (but NOT Rolex). Two sizes:STANDARD £12.50Will fit watch backs from 15mm to 35mm diameter.JUMBO £15.00Will fit watch backs from 25MM to 50mm diameterPeople who bought this item also bought:
Ref: OPENSW
For removing the backs of watches that 'snap' off. Watch back opener for snap-back watches made in Switzerland, penkife blade one side, watch back opener blade the other, best quality.People who bought this item also bought:
Ref: S-LUGS
Components box with 17 packets of 25 spring lugs 8mm to 24mm + 1 packet assorted = 450 altogether.Some people call these spring bars, some call them spring lugs or watch lugs (technically these are the bars, they fit into the lugs that stick out of the watch case).People who bought this item also bought:
Ref: wbarem-2
For removing and replacing the spring bars (spring lugs) that hold the straps on watches. This one is heavy-duty with a finer-than-usual prong end and a larger-than-usual pusher end.People who bought this item also bought:
Ref: CLPR-MULTI
Slot the watch bracelet into the base, line up the pin or screw, drop the screwdriver or pin remover into the hole at the top (choose between the 2.5mm screwdriver or a selection of different pin-removers) - the rest is easy, everything is held firmly in place.
Ref: TWEEZ-PL-2
High quality nylon-tipped tweezers, designed originally for electronics work but ideally suited to changing watch batteries, easy to handle, avoids touching the battery with metal and short-circuiting it - the reason for customers returning to the jewellers every couple of weeks complaining that their battery has gone flat.People who bought this item also bought:
Ref: TWEEZ-BATT
Many a time I have fetched the big box labelled "electrical repair" and set up the volt meter, just to test a battery. If only I had known about these! Press the ends either side of the battery (any 1.5 volt cell, e.g. watch battery / button battery)...and if the battery is good the entire end of the tweezers light up. So simple!People who bought this item also bought:
Ref: LIFT
The domed plastic 'watch glasses' are removed and inserted by squeezing them very slightly, but this must be done evenly, all the way round.
Ref: PLHOLE
For making holes in watch straps. (Please ignore the notice I place on this at our stand at the fairs, it's not really for ear piercing).
Ref: OPENFL
Favre Leuba openers, choice of 7 sizes. Why "Clearance" ?
